MOT-65 MOT-65 MOT-65 MOT-65 MOT-65

5.4 Inch OTDR OPM VFL LS Cable Test In One Optical Fiber Tester

Model: MOT-65

● 5.4 inch IPS touch screen, 1920*1152 resolution

● 4 core CPU, support online update and install applications

● Internal storage and external TF card 

● Report saved as EXCEL, PDF, or screenshots format

● Support snap shot screen

● Support remote control

● 5V 2A power output, as power bank

● Gigabit network port, support Ping and scan IP address etc

● Wifi Analyzer, create wifi hotspot

● RJ45 TDR cable’s status and length, max 600meter

● Cable length, the max length up to 3km

● UTP cable tester, UTP cable etc continuity test

● PoE supply power detection and PoE voltage and power measurement 

● Stable laser source, optical power meter and visual fault locator

OTDR.jpg 光功率计.png 红光源.png 稳定光源.png 网线TDR测试.png   

Features Specifications Connection diagram Download


● 5.4 inch IPS touch screen, 1920*1152 resolutions

● 1310/1550/1610 wavelength optional, 26/28/30/32/34dB Dynamic range optional, max test range 150KM*

● Stable laser source, support CW/270/330/1000/2000Hz

● Test fiber’s length, loss, attenuation parameters and event map, locate connection point/ fusion point

● Automatic analysis of various linkers/fusion points, easy analyze of various events

● Save and view the testing curves, support zoom and move curves, view details

● Support saving curves number ≥30000pcs 

● Support create testing report, curve trajectory graphs, parameter settings, fiber event information, and fiber link information

● Report saved as EXCEL, PDF, or screenshots format etc

● Optical Loss test, detect the optical or optical components loss value .It is a key basic function for confirming the optic fiber installation condition and fault status. Light source shares with OTDR ports outputs laser light. 

● Visual Fault Locator, it Outputs red light for checking continuity of launch fibers or short patch cord. Breaks and bending in fiber can be identified visually.

● Stable Laser Source, it shares OTDR optical port and work on the same working wavelength of OTDR, the output power can be adjustable for different testing applications. With modulated light at 270Hz/330Hz/1 kHz/2kHz, it can be used for fiber identification or continuity check purpose on a live fiber network.

● Optical power meter with five wavelength 1625nm,1550nm, 1490nm, 1310nm,1300nm, 850nm, linear or nonlinear optical power display, both for optical power testing and Fiber link loss relative measurement.

Cable test:

● Improvement cable tester, UTP cable, telephone cable etc sequence and continuity test, save testing report. Support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug

● Upgraded RJ45 cable TDR test, support cable status and length, max test 600m

● Cable tracer, search BNC cable, network cable and telephone cable from the mess cables

● Cable length, BNC cable, network cable, telephone cable, RVV cable, elevator cable, and cat 5/6 cable’s length test. Max measurement for cable’s open is 3KM* (Short circuit length test not supported) *

Other functions:

● Tester Play: Tester, android version mobile phone and PC display at the same time 

● Network tool, Ping test, IP scan, PPPOE, Port flashing,etc.

● 7.4V 5200mA Li-ion Battery, 2.5 hours charging, normal working time lasts 11 hours

OTDR   Technical Specifications

Wavelength (nm) Optional *



Only support detects   optical signal



Support Active   fiber testing



Dynamic   range(dB)2  Optional*








Pulse   width (ns)


Testing range

≤150 Km

Event blind   zone (m)3


Attenuation   blind zone (m)3


Linearity   (dB/dB)

±0.05 dB/ dB

Loss threshold   (dB)


Loss   resolution ratio (dB)


Minimum   distance resolution


Sampling   point(K)


Distance   uncertainty (m)

±(1 m + 5×10-5× distance + sampling   interval)

Distance scope   (km)


Typical   real-time refreshing duration


File format

SOR standard format/PDF/EXCEL

Measurement   duration

5sec, 10sec, 15sec, 30sec,   1min, 2min, and 3min are selectable


FLASH (EMMC)8G + TF card

Interface type



1. The technical   specification describes the ensured performance of the instrument when using   typical PC model connector to measure, without considering the uncertainty   caused by optical fiber refractivity.

2. Dynamic range is the data   measured under the condition of the maximum pulse width and 3 minutes of   average time. Dynamic range is the data measured under the condition of   200km/20000ns/3min.

3. Measuring conditions of   blind zone: reflection event is within 5Km, reflection strength is 45dB.   Measured by the minimum pulse width.


Size   & Display

5.4 inch IPS touch screen ,1920*1152   resolution

Network   Port

1000M LAN   port, 10/100/1000M auto adapt


Built in   2.4G WIFI, speeds150M

Power   output

5V 2A power output, as power bank

PoE   detection

Display the standard PoE or   Non-standard PoE, PoE voltage and cable connection status

UTP   cable test

Test UTP cable connection status and   display on the screen. Read the number on the screen. detect the   near-end, mid-end and far-end fault point of RJ45 cable connector, can test   shield cable

RJ45   TDR cable test

Support cable status and length, max 600m

Data   monitor

Captures and analyzes the command data   from controlling device, also can send hexadecimal

Network   test

Trace route, Link monitor, DHCP server,   port flashing, Ping test

Digital   Cable tracer

Search BNC cable,   network cable and telephone cable from the mess cables. Cable   tracer and UTP cable test app in the same interface, also can search shield   cable


Voltage range




Alarm type

Sounds and light double alarms


CAT.III 1000V / CAT.IV 600V;CE

Visual   fault locator

10mW visual fault locator with 650nm   wavelength, emit red laser sources to test multi-mode and single mode fiber’s   bending and breakage, test range 8KM

Optical   power meter

Wavelength:1625,1550nm,1490nm,1310nm,1300nm,850nm,   measurement range ,-70 +10 dBm, for optical power   testing and Fiber link loss relative measurement

Laser source parameter

Laser type


Output wavelength



Output power





CW,土0.2dB/15min (Test after boot for 15min)


External   power supply

DC 12V1A


Built-in 7.4V Li-ion battery, 5200mAh


After charging 2.5 hours, normal   working time 11 hours


Operation   setting

OSD menu, select your desired language:   English, Portuguese, Korean, Russian, Italian, French, Polish, Spanish,   Japanese, Turkish, Deutsch, Serbian, Czech, Vietnamese etc

Auto   off

5-30 (mins)

Working environment

Working   Temperature


Working   Humidity



203mmX141mmX46mm / 0.92Kg


Multi-function MOT-65 OTDR series is an essential tool for fiber length and network testing. OTDR displays the power of the returned signal related to distance. The information can be used to confirm the transmission quality of a fiber optic link. It is widely used in the maintenance, construction and monitoring of cable line. It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of splice, and failure location, etc. If taking the all in one OTDR, it will make working conditions safer and increasing productivity.

● Fiber length testing and Event Map etc

● PING Test, IP Scan, Port flashing and WIFI

● Network cabling project installation and maintenance